Onward to the Ramps!
The habitat 5 ramp instructions are pretty clear and easy to follow for building the hinges. The hinges were constructed and here you see the top and bottom view of the ramps.
As always I'll go back at the end and dress up the scuffs from where the MDF parts were removed from their frame. Reaper "Nut Brown" is almost a perfect match to the seared brown edges.
I stood the building on end to line up the ramps the way I wanted and glued the hinges on. The ramps work as designed although I'm gonna have to dirty up the underside... not that the building should be deployed with the ramps in the upright position but... ya never know!
Extra resin bits...
There are a couple of power supply panels that attach to the outside of the building, three fan covers, two vid screen frames, six light fixtures (I actually need seven but one seems to have escaped during the long Winter pause so I may need to fabricate on from the MDF Frame debris pile)
...and then came the five angular pod things... these took a minute to figure out but once I got looking at the spare MDF pile and how the ladders must attach to the building it became clear that these are Feet to support the building above ground level. Its interesting because these are optional resin bits but the ladders require the building to be elevated or the ladders would have to be cut down to fit.
Not shown are a handful of small resin vent covers that I ended up putting in the spare parts bin because the interior etched areas that they cover were not perforated like the main vents. I ended up wanting to keep the interior vent details all MDF and painted similarly. These covers won't go to waste though! Its always handy to have a few extra bits like those.
Next up... finish painting these extra resins and sort out the remaining MDF installation that wasn't covered in the Rough Guide. This is mostly exterior ladders and interior catwalks. I seem to be missing the steps for the catwalk access so I'll have to take another look round to see if they wandered off during he extended time this sat on my desk. At any rate I think general construction should be finished in one more session and then any additional weathering or detailing will be tackled. There is one spot on the outside of the building that just looks unfinished so I'll have to do something to dress that up.
Back to the desk!
No comments:
Post a Comment