3D printing: Ruined Lighthouse and Kingdom Death inspired terrain.

In the continuing quest to improve the terrain of the fabulous Kingdom Death Monster game I've added a set of 3D printed fallen and broken columns.

The printing in the area around the faces was a bit dicey and tended to have spaces and holes.  Nothing really serious but worth noting.

 I went with a tawny marbleized look for the columns because I imagine the twilight world of the Survivors to be covered in dirt, dust, and mold.  The ground faces tend to be alabaster because they might be newly deposited while the columns seem to have fallen long ago.

In any case they were an experiment in painting marbled surfaces and I learned a lot about painting in the various veining.

A sampling of the current state of the Kingdom Death inspired terrain set. 

 The biggest downside of this set is that the minis do not always sit easily on some of the elements that are intended to share a playable space with... its doable, just not pretty to look at.

Fortunately the columns and some of the larger things, like egg piles and sacks, are not intended as playable spaces so its not really a problem and the do look a lot better than the flat cardboard they replace. 

 Eerie lights emanating from the crystals complements the light variations on the mini bases.

I think that completes the terrain for the game.  I've printed replacements for all the cardboard terrain counters that I've found in the game and the Spidicules expansion... If I find anything else there will be more!

 Moving on to the Ruined Lighthouse from the Rampage: Lost Isles Kickstarter.

The first happy lesson was that printing this with black material was both less expensive (Black seems to be the cheapest color of PLA roll around by a couple of dollars a roll) and much, much easier to paint up.

Shown throughout with some of the excellent Raging Heroes Void Elves for scale.  This is important as, due to the limitations of my build space, I was compelled to print the model at 99% of its intended size.

 Because the material is black the primer stage was less demanding and full coverage of the crevices was not required.  This saved a lot of time and consumed much less primer than the tan, white, or gray material. 

 Rampage is really good about updating their products post release and I get regular emails about updated files.  Generally speaking these files seem to be re-scaling models that might have been proportioned for 20mm square bases to the increasingly common 30mm round lipped bases.

 Another great thing about Rampage is that many of their large models have .stl files for both large and small format printers.

In my case... my printer (Snapmaker) is on the petite side of small... which means that I am unable to print this size of model without using the small format files...without dramatically reducing the model dimensions.  Because of the inclusion of the small format files I'm able to print this model at 99% of its intended size.  Score!

 The model is quite large and I noticed that it printed with small holes for magnets!  Sometimes Storing and transporting big terrain models is problematic so I popped magnets into the designated holes and it went together surprisingly well... with a satisfying snapping sound to boot!

Here is the model broken down for storage/transport. I'll be adding magnets to many more buildings as, in addition to making them easy to deal with when not in use, it really opens up access to the interiors while on the tabletop!  Double win!

All in all this took me a time fraction of the time it takes to paint an equivalent model in another color.  Printing took a couple of days but cleanup and adding magnets time was under an hour.  Painting was done in two short afternoon sessions.









An early experiment with texture rollers from Greenstuff World (Thanks for the heads up Ed!).

While these will be great for Twisted! I'm really going to want to switch to a less spendy putty or clay and roll out big sheets of texture.  Then I'll want to get, or make, some small size biscuit/cookie cutters and punch out circles and squares.  I'm having difficulty locating circles and squares in the right sizes for this but its early days and I haven't put a lot of time into the search... hmmm... maybe some pill bottles are the right size.... we'll see!

Back to the desk to experiment!