Destroyed Ford F-30 LRDG with Bofors 37mm (UK, WW2)

 3D printed destroyed vehicle for WW2 games in 28mm. Plant based gray elegoo resin.

Sprayed camo tan Krylon paint and primer combo. Washed with Secret Weapon (SW) Dark Sepia brushed up and touch ups SW light Dust. Weathering with Forge World (FW) weathering powder Black Soot. Edge highlights for damages SW Engine Metal. Ground cover Army Painter (AP) Highland Tufts and Lowland Shrubs.

A few other projects on the desk. Notably a WW2 german Sd.Kfz.9 from the same file collection. Its really illustrative in terms of how massive that vehicle really was compared to other vehicles in its class. 

Also appearing are a couple of “nearly dones” from the Junkfort, some fishing boats and a small ship for use with Blood and Plunder and general Roleplaying games.

Back to the grind!

Junkfort Project

Sticking with the post-apocalypse theme I’ve been working on the Junkfort. These are printed on an Anycubic Kobra Max FDM machine and I’ve had some trouble dialing it in. Its quite temperamental to date and I’ve been spending more time rebuilding the hot end than printing with it. The files come from Rampage and they are full of very atmospheric details.

This is turning out to be a weathering exercise. In the main I used Secret Weapon acrylics and washes with the notable exception of white where I used Reaper Bone Triad… and, of course black which was Craft Smart.

More of this on the desk as well as wrapping up some ships for Blood and plunder. Otherwise I’ve been focusing on the resin printers doing base toppers and a bunch of Avatars of War trolls and goblins. I may also turn the printers off for a bit and focus on getting through the enormous pile of Kingdom Death that just got even bigger with the arrival of the Gambler’s Chest expansion.

Back to the brushes!

 
 

Malifaux: Avatar of Vengeance

Avatar of Vengeance

 

Continuing the tidy up of models that were started but never finished,  mostly due to packing up and moving house something like 14 times in the past 25 years... but also due to the occasional attack of  squirrel syndrome, I knocked out this old metal, 1st edition Malifaux, Avatar of Vengeance. Shown above with Kirai Ankoku for scale.

I haven't played 3rd edition... not sure I played 2nd either although I did get 2nd edition rules and some of the wonderful hard plastic kits. I think the Avatar type models have been retired from the game although there seems to be some cards available to allow these to be played as Emissaries.. whatever those are! Don't hate me I don't know these rules I'm just painting the pile!

The base is sculpted from green stuff.

Whole Model primed Krylon White.

The red robes are Blood Red (Reaper (R)), layer with Phoenix Red (R), whole robe wash with Drying Blood (Secret Weapon (SW)), target wash again with Drying Blood.

Green robe detail sash is German Luftwaffe Green (Vallejo Panzer Colors (VPC)) detail and edge highlights with Verdigris Pale Green (SW) wash with Sapphire (SW).

Ghostly Avatar painted Hexwraith Green (Games Workshop(GW) straight out of the bottle. Highlights are Splintered Bone (R) and a targeted re-application of Hexwraith Green for depth of color wraps it up.

Rug washed with Sapphire (SW) dry brush with Sky Blue (R) top dry brush with Ice Blue (GW). Fringe is Brass Casings (SW) Flesh Wash (SW)

Stone is Sky Gray (R) with a very diluted Sewer Water (SW) wash focused on edges and crevices.

I'm not sure what is up next... I found a pile of stuff to be repaired after the move so I may work on that.  There is also a Military Temporary Command Post from Antenocitis' Workshop in progress and I just got the new beefier Exemplar Sisters from Raging Heroes that I'd like to have a go at.

Back to the desk!

Joan of Arc 15mm Core Game, GW Forest Goblin Spider Riders, an Epicast Stomper Tune-up in progress and fun with static grass!

The Joan of Arc game is so ambitious!  Its a board game, a Tanletop Mini Game, its a Historical Game, its a Fantasy Game. It has an RPG and its almost an action RPG right out of the box... It even has aerial combat because.... Angels and Dragons... whew!  Its gonna be a fun ride!

From the core box: The Tarasque, The Unicorn, The Archangel Gabriel, 4 Angels, 2 Bullock Wagons.

As you can see you can go full on fantasy right out of the starter box... I think one of the scenarios is a werewolf hunt even... or you can stay with the historical scenarios. Its a great transitional game.

These were all sprayed a dark camo green primer (Rustoleum), damp-brushed with white craft paint and washed with Secret Weapon (SW) Washes.  The wagons then got a dry-brush of Sunny Flesh (Vallejo(V)) to make the wood pop.

Below is the tray ready for re-interment in the game box... In this Golden Era of Mega-Games I'm going to have to put some thought into how to condense the numerous expansions.

The angels got sky themed bases to go with the sky tiles in the aerial combat portion of the game.  Sky Blue (Warpaints) Stipple with white, wash with Blue (SW).  White robes are layered Graveyard Bone and Splintered Bone from the (Reaper) Bone Triad.   Gold is Brass Casings (SW) Flesh Wash (SW) dry-brush Silver (V).

 Being easily distracted by shiny things... I was unable to simply put the static grass applicator back into its box and decided to fix a long standing problem... namely my ancient 40K second edition Epicast Stompa!  Its never stood well on its own and is heavy enough to take out models it happen to fall on...doh! So I thought I'll just slap a base on it and its "problem solved!" ... 

...then I noticed that the old second edition paint-job looked really, really, dated so... doing something I very rarely do... I decided to do a bit of an update.  These are the pictures of its original state except for some black lining I started to do before remembering to snap a photo.  I'm going to preserve some elements of the original and bring it up to date without starting from scratch.  Well, that's the plan anyway!

The completed Forest Goblin Spider Riders. Ready for an Oldhammer rumble!

Speaking of a rumble I literally hate this new Blogger interface!  Its more primitive than its predecessor and seems specifically designed to be rigid and unwieldy.  For example I'd like to put this sentence at the bottom of the page... but I can't do that without actually removing the picture below... fabulous improvement... This update would normally have taken be about 15 minutes to compose on the fly but I've been at this now for three hours and still can't get the words and the pictures to go where I want them.

MADE
  OF

 FAIL  

A-Z Mart (Weathered)

The first building out of the gate for the Post Apocalypse terrain set is the A-Z Mart (weathered) from the "Survival" line over at Antenocitis' Workshop

This is a super cool model with great details and a lot of playable interior space.

 In addition to the usual great photo print details there is a lot of damaged glass for the windows and the doors to the coolers, which give a really convincing 3D effect to the coolers.

The building is Prepainted MDF which really means that the MDF is covered with a single color surface process that helps make it look less like MDF and when you go to do some additional painting its a great starting point.

 For this building I've gone with the prepainted color scheme and just added some weathering, decals (Antenocitis Workshop and Ginfritter's Gnomish Workshop), and the odd bit of flat art to that.

Weathering was accomplished mostly with Forge World Weathering Powders Medium Earth, Black Soot, Red Rust, and Orange Rust.

I didn't additionally weather the glass because the cracking effects might be obscured.

The Newsboxes on the outside are also from Antenocitis Workshop and I used some of the photo elements from the A-Z Mart to create newspapers and other signs on them.

The Newsboxes are very heavily weathered like the pay phones from the previous post using the same technique but with red instead of blue.

The AC unit on this model has been swapped for one of the MDF units from the Lazy Dog Saloon.  The AC unit provided with the model is resin cast and has a sleeker rounded look and a lower, longer shape.

Next up is the Pristine version of this building and LED retrofits to the Undertown table.

Data Trust interior details

 The interior resin details are done for the Data Trust.

I replaced the little searchlight that I had scratch built to use as a grip for removing the roof with a resin and metal drone control and coms array.  The dish antennas may prove tricky in the long run and complicate storage so I may, at some point, add magnets to these... I'm not certain of the benefit vs the risk of damage as the dishes are metal and there is some weight stress on the connection points that might not be great for magnets... we'll see I suppose.

The control point was painted over a black primer with Orange Heat (Secret Weapon) which is a really interesting technical paint I highlighted with Orange Rust (Secret Weapon) and glazed with Orange Wash (Secret Weapon) lining was Rust Shadow (Secret Weapon) which is fast becoming my favorite liner.

The dishes are metal primed black dry brushed with Silver (Vallejo) washed with Armor Wash (Secret Weapon) red panels are Blood Red (Reaper) glaze of Orange Heat, glaze of Orange Rust liner with Rust Shadow. 

Grey Panels Stormy Grey (Reaper) Brush up with Sky Grey (Reaper)

  I love that you can see details through the open windows and that is my motivation to eventually add LED lighting... once I find the bits!

Raging Heroes Void Elf for scale today.

Exterior Weathering is mostly Forge World Weathering Powders, primarily Medium Earth.

Ground Floor interior details: Food Vending Machine, Large TV, Coffee Station, Interactive Table and two Bench Seats. Details glued to the walls except the table and seats which are magnetized and can be removed as required.

I had already constructed the doors before I looked at the contents of the resin upgrade pack.  The upgrade pack includes replacement door frames and doors that are armored. 

I decided to keep the office style doors that I had already installed and use the armored door elements later... maybe when building a NERVE (Neon Genesis Evangelion) outpost or SD-6 (Alias)style hidden facility.

Moral of the story... always check the upgrade sets before building the base structure!

Data Trust Upstairs interior features four Data Walls and a master interface terminal.  The Data Walls are glued in and the Interface Terminal is magnetized so it can be reoriented or removed.





There is still a lot more of the Undertown to do including an awesome Game Shop! but... its pretty playable at the moment so I think I'll veer into the Post Apocalypse buildings for a bit and get a baseline of buildings set up.  Since we're running Fallout:Wasteland Warfare from time to time I'd better get something more suitable for that built.

Back to the desk!

Modern and Post Apocalyptic vehicle wrecks and trash bins

 While the ubiquitous ruins frequently found on my table, and the tables of almost ever 40K player, can do great service as Post Apocalypse terrain I have just begun generating a more genre specific set primarily for use with Fallout: Wasteland Warfare, Gamma World, The Order of Vampire Hunters, and all things related to the Zombie Apocalypse.

 Starting with an old favorite Antenocitis Workshop from their Survival Vehicles category: Flipped Car, Bricked Merc, and Fender Bender.

These are really fun sculpts with lots of character and the resin material is the typical super high quality that comes from Antenocitis Workshop... smooth, very little cleaning required, and takes paint readily.








The base colors were accomplished via rattlecan Primer+Paint combos from Krylon and Rustoleum. Dry-Brushing to bring out the detail which was bloc painted in basic colors. 

Weathering started with Brown, Red, Yellow, and Orange Rust from Secret Weapon and finished with Forge World Powders Orange Rust for the Brick impact area, muffler cases and some parts of the iron beams.

 A quick side trip into an assortment of bins (Also from Antenocitis Workshop) which are useful across the genre barrier.  Sprayed Krylon Camo Green and dry-brushed these represent some common types of bins encountered in residential and shopping areas.

 Back to the wrecks!  The Flipped Car, shown with a Star Saga Veermyn lurking nearby, is covered in viney growths indicating that its been like this for quite a while.  It out of place in the Undertown and would be more at home in a junkyard or in a setting like Fallout.

 Fender Bender reminds me of the Yugo... if anyone remembers those... the implication is that the car was struck by the motorcycle and was bent by the impact... made of repurposed bubblegum wrapper!

... then there are metal beams and even a kitchen sink on it...

who know why those Plague guys are hanging out near it... but time to meet my little friend!

The Bricked Merc is fun and I wonder where all the brick came from... so I think I'll have to make a collapsing brick building in this theme just to have it sit near this one.

Plague Abomination and operative from Star Saga.

Its always fun working in a new theme.  I think a convenience store and a petrol station... and maybe a shanty saloon would make for a good start... oh and a mat...

Back to the desk!

Undertown Flats... the interior spaces...

 The interior resin for the Undertown Flats from Antenociti's Workshop are installed. 

These are from the Undertown Kickstarter and I believe the models have since been redesigned to replace the resin components with MDF and printed graphics.  Honestly I love the resin bits but the kit redesigns are faster and easier to build and leave more space available for mini placement... so for game-play probably a net improvement.

 Above are most of the elements in progress.  As the Flats are more upscale than the more "barracks like" tenements I thought I'd play with color coordinated interiors a bit... kind of in the vein of "Personalize your flat to your unique style and taste by selecting one of three standard color variations" Not high end, but a little enough above the chaff to feel like you have something to lose, the golden chains of corporate employment.

 Each Flat occupies a full level of the building and is accessible via elevator.  They are equipped with a bed big enough to share, a food storage and prep station a table that doubles as an entertainment/communication system, two bench chairs, a life support panel, one large and one small video screen a shower/general hygiene unit, a toilet and a sink.  A HUGE improvement over the equipment available to residents of the Tenements.

 The resin was washed, primed with Krylon Camouflage beige dry-brushed with Sand colored Craft paint washed with Secret Weapon Washes edged with a sharpie and trim painted Reaper Sky Grey.  Mirrors are GW Runefang Steel.

Each floor has a different layout and for added flexibility the beds, tables, and bench chairs are attached with magnets and can be removed or re-positioned as required. The other elements are glued in place.

 The next thing up will be the resin bits for Whiskey Jacks and the Data Trust.  Once all the interior resin for these is finished and installed, and (hopefully) before starting additional Undertown buildings, I'll return to these to add interior lights which should make some cool view of the interiors available through the windows and doors while the buildings are closed up.

More views of the Flats.

Back to the desk!